-
-
-
-
-
Einhell 18V Power X-Change Cordless Hedge Trimmer 1x 2.5Ah Battery Kit
£99.00 inc. VAT£82.50 ex. VAT -
Milwaukee M18ONEFHIWF34-502X 18V 3/4" ONE-KEY FUEL Impact Wrench 2x 5.0Ah Battery Kit
£458.86 inc. VAT£382.38 ex. VAT -
-
Makita DGA463Z 18V LXT Gen 2 BRUSHLESS 115mm Angle Grinder - Body Only
£188.40 inc. VAT£157.00 ex. VAT -
Makita DSC102ZJ 18V LXT BRUSHLESS Threaded Bar Rod Cutter with Type 3 MakPac Case - Body Only
£539.99 inc. VAT£449.99 ex. VAT -
Teng Tools 9126 10pc 1/2in Drive Metric Deep Air Impact Socket Tools Set 10-24mm
£71.99 inc. VAT£59.99 ex. VAT -
-
-
-
-
DeWalt DCS577T2 54V XR FLEXVOLT Hi Torque Worm Drive Circular Saw 2x 6Ah Battery Kit
£525.00 inc. VAT£437.50 ex. VAT -
Eibenstock EHB32/2.2 RRL Professional 1800W High Torque Gutbuster Rotary Drill - 240V
£697.99 inc. VAT£581.66 ex. VAT -
SAVE 8%
DeWALT DCG418X2 54V XR FLEXVOLT 125mm Angle Grinder 2x 9Ah Battery Kit
Was £550.00 inc. VAT£505.56 inc. VATWas £458.33 ex. VAT£421.30 ex. VAT -
-
-
Eibenstock EHB32/2.2 RRL Professional 1800W High Torque Gutbuster Rotary Drill - 110V
£697.99 inc. VAT£581.66 ex. VAT -
Makita 198768-1 Split-Shaft Brush Cutter Attachment for DUX60Z Multi-Tool System
£83.99 inc. VAT£69.99 ex. VAT -
Makita GA004GD202 40V Max XGT 115mm Angle Grinder 2x 2.5Ah Battery Kit
£419.00 inc. VAT£349.17 ex. VAT -
DeWALT DCS573NT 18V XR Powerstack High Power 190mm Circular Saw - Body Only
£239.00 inc. VAT£199.17 ex. VAT -
Makita DSC251ZK 18V LXT BRUSHLESS Steel Rod Cutter with Carry Case - Body Only
£1,320.00 inc. VAT£1,100.00 ex. VAT -
DeWALT DCH172N 18V XR Ultra Compact Brushless SDS+ Rotary Hammer Drill - Body Only
£169.99 inc. VAT£141.66 ex. VAT -
-
-
Makita DMR200 10.8V-18V Bluetooth Jobsite Music Speaker Body Only Bare Unit
£86.16 inc. VAT£71.80 ex. VAT -
-
Milwaukee M12CCS44-602X 12V FUEL Circular Saw with 2x 6.0Ah Battery Kit
£299.99 inc. VAT£249.99 ex. VAT -
-
-
Milwaukee M1418C6 Multi-Bay Charger For M18 & M14 Li-Ion Batteries - 240V
£119.99 inc. VAT£99.99 ex. VAT -
-
-
-
-
-
Makita 8406 Diamond Core and Hammer Drill 110V with Robust Carry Case
£271.00 inc. VAT£225.83 ex. VAT -
-
-
-
DeWALT DCF921H2T-GB 18V XR Brushless 1/2” Compact Impact Wrench 2 x 5Ah Powerstack Battery Kit
£359.99 inc. VAT£299.99 ex. VAT -
Eibenstock EMF180.2 Professional 2300W 7" Twin Blade Diamond Wall Chaser - 240V
£1,036.99 inc. VAT£864.16 ex. VAT -
-
-
Bosch GST18V-155BCN 18V Professional Brushless Jigsaw Bow Grip Body Only
£256.99 inc. VAT£214.16 ex. VAT -
Makita KP001GD201 40V Max XGT Planer 82mm Width 2x 2.5Ah Battery Kit
£509.00 inc. VAT£424.17 ex. VAT -
Makita LS004GD201 40V Max XGT BRUSHLESS 260mm Slide Compound Mitre Saw Kit
£899.99 inc. VAT£749.99 ex. VAT -
-
-
Bosch GDX18V-200N 18V Professional BRUSHLESS High Power Impact Driver/Wrench - Body Only
£149.99 inc. VAT£124.99 ex. VAT -
Eibenstock Professional 1400W Diamond Surface Grinder for Wood & Paint & Varnish Shaving - 110V
£439.99 inc. VAT£366.66 ex. VAT -
Eibenstock Professional 1400W Diamond Surface Grinder for Wood & Paint & Varnish Shaving - 240V
£439.99 inc. VAT£366.66 ex. VAT -
-
-
-
-
-
DeWALT DCS578N 54V XR FLEXVOLT High Power 190mm Circular Saw - Body Only
£249.99 inc. VAT£208.32 ex. VAT -
Einhell 18V Power X-Change High Reach Multi-Head Pole Hedge Trimmer Cutter 3Ah Kit
£199.00 inc. VAT£165.83 ex. VAT -
-
DeWALT DCF902D2 12V XR BRUSHLESS Sub-Compact 3/8" Impact Wrench 2x 2.0Ah Battery Kit
£180.00 inc. VAT£150.00 ex. VAT -
Makita DUH751RT 18V LXT BRUSHLESS 75cm Hedge Trimmer 1x 5.0Ah Battery Kit
£429.00 inc. VAT£357.50 ex. VAT -
-
-
-
-
SIP 02137 Cobalt Gravity Fed Air Spray Gun for Spraying Car Body Panel Paint 02137
£17.99 inc. VAT£14.99 ex. VAT -
-
SAVE 51%
-
-
Bosch 18V BITURBO Bluetooth Circular Saw with L-Boxx Case - Body Only
£395.99 inc. VAT£329.99 ex. VAT -
DeWALT DCG418T2 54V XR FLEXVOLT 125mm Angle Grinder 2x 6Ah Battery Kit
£415.00 inc. VAT£345.83 ex. VAT -
-
-
Eibenstock Professional 2090W FloorMix Mobile Mixing Station - 110V
£2,030.99 inc. VAT£1,692.49 ex. VAT -
Milwaukee M12FRAIWF12-0 12V FUEL Right Angle 1/2" Impact Wrench - Body Only
£149.99 inc. VAT£124.99 ex. VAT -
Bosch 1600A02T5S 18V Pro Core 2x 8Ah Battery Twin Pack Including Fast Charger
£299.00 inc. VAT£249.17 ex. VAT -
DeWALT DCS578X2 54V XR FLEXVOLT 190mm Circular Saw 2x 9Ah Battery Kit
£599.99 inc. VAT£499.99 ex. VAT -
-
Milwaukee M18FOPH-EXA 18V FUEL Outdoor Power Head Extension Attachment
£59.99 inc. VAT£49.99 ex. VAT -
-
-
Bosch 1600A02T5X 18V Pro Core 2x 12.0Ah Battery Twin Pack and Fast Charger
£390.00 inc. VAT£325.00 ex. VAT -
Bosch GCM18V-216N 18V 216mm BITURBO BRUSHLESS Sliding Mitre Saw - Body Only
£509.99 inc. VAT£424.99 ex. VAT -
-
-
-
-
-
-
-
Bosch 3pc Oscillating Multi Tool Blade Set Wood & Metal OMT STARLOCK 2608662343
£14.99 inc. VAT£12.49 ex. VAT -
-
-
-
-
-
Power Tool FAQS
1. How often should power tools be inspected and PAT tested?
In the UK, the recommended frequency for inspecting and PAT (Portable Appliance Testing) of power tools can vary depending on the type of equipment and the environment in which it is used. We’ve provided some guidelines to assist with safe tool usage:
Visual Inspection
Power tools should undergo a visual inspection before each use, to check for any obvious signs of damage or wear.
Formal Inspection and PAT Testing
The UK government’s Health and Safety Executive has guidelines in place for the testing of portable appliances, termed PAT (Portable Appliance testing) which is applicable to power tools. Here’s what you need to know according the HSE:
You don’t have to test annually
The main stipulation of the Electricity at Work Regulations 1989 is that any electrical equipment that has the potential to cause injury is maintained in a safe condition.
Source:HSE
The regulations do not however specify how often this needs to be done; the main objective is to ensure tool safety for your specific use case.
Test frequencies will vary
There is no formal requirement for how often potable appliances and power tools in particular should be tested, however the HSE does say that:
“The frequency of inspection and testing depends upon the type of equipment and the environment it is used in. For example, a power tool used on a construction site should be examined more frequently than a lamp in a hotel bedroom.”
Source:HSE
There are a number of factors to think about when assessing the risk factors associated with power tools and how often they need testing, including:
- The type of power tool (e.g. handheld or stationary)
- The frequency of use – tools used more regularly will obviously need to be checked more frequently
- The age of the power tool
- The environment in which the power tool is used (if it is used in wet, dusty, or hazardous conditions it will need checking in more detail)
- The manufacturer's recommendations
The above factors will determine how often power tools should be formally inspected.
Do records need to be kept of testing, or appliances labelled?
Technically no, however it is certainly a good idea to do both to adhere to safety best practices.
If you have concerns about the safety of your equipment, whether you’re a professional or a DIY enthusiast, we would always recommend that you consult with a qualified electrical or health and safety professional.
2. What times and days are power tools allowed to be used in the UK?
Regardless of whether you’re a trade professional or just a keen DIYer looking to make some home improvements, one thing you will want to be aware of is noise control. Power tools typically generate between 80 and 110 decibels when in use, which is certainly on the loud side, and you’ll want to use hearing protection for yourself if using them for extended periods. From the point of view of being courteous to residents it’s important to be aware of accepted times and days to use power tools. Below we’ve listed the commonly accepted hours for power tool work:
For professional building and construction work
the Royal Borough of Greenwich in their “noise from building works” page provide a good guideline for general building and construction work, although you will still need to be aware of circumstances and restrictions relating to the individual area in which you will be working. They suggest that general construction work should be limited to:
- Monday to Friday, 8am to 6pm
- Saturdays 8am to 1pm
- Noisy work should not take place on Sundays and bank holidays
Exceptions can be made for urgent or emergency work.
DIY usage
For DIY and non-professional use, restrictions are more relaxed, although Oxford City Council recommends that power tools are only used between 7am and 9pm each day. Many local councils and communities expect considerate use, which will include avoiding early mornings, late evenings, Sundays, and Bank Holidays in order to be considerate to the community. You can also be more considerate by:
- Giving neighbours advance warning/apologising in advance for the noise
- Agreeing with them what times are best for tools to be used, to cause minimal disruption – this will be particularly relevant if they have children or work night shifts, for example
- If what you are doing is going to be unavoidably disruptive, consider if it can wait until better circumstances present themselves – a day off where you can use your power tool at a different time or waiting until the neighbours go on holiday, for instance.
3. Will my Power Tool be in its Original Packaging?
Our products are always provided to you brand new and we retain all original packing where possible. However, in some cases, some products may arrive with limited/no manufacturer packaging due to the nature of the item; with regards to power tools this may mean that if you order a ‘body only’ power tool the packaging for it may be more limited. If you want to ask any questions about the products we stock then please Contact Us and we'll be happy to help.
If you have further questions about us and our products please visit our FAQ page.
4. Extended warranties and product registration
If you buy any of the following brands of power tools with us, you’ll be able to register for an extended warranty with them:
- Bosch
- Dewalt
- Eibenstock
- Makita
- Milwaukee
For more details on registering your power tool please visit this link: